Customize your company's dynamometer installation with these easy to use options. This is only a partial listing – call for other options.

"Learn more from every dyno testing session!"

This is only a partial list of our most popular add-ons. Please call for more information on your any custom transducers, adapters, etc. which you may require for your specific application.

 DYNOmite Dynamometer Accessories (partial listing, click to view complete Dyno Accessories Page): 
 Click on image or “Details” link (below) for more-information page.
   
Click to Marine Engine Dyno page.

Inboard Engine Test Stand Kit

#050-902-1K

Click for Specifications

Optional automotive-style engine test stand (only) for running inboard and I/O engines – out of the boat. Kit includes: mobile engine stand, wall console, throttle, bell-housing adapter plate, and 1-1/8" x 10 splined drive-plate input shaft (less dynamometer, bell housing, and drive-plate).

$8,195

Click to Engine Adapters page

PWC Adapter - Kawasaki 155mm

#100-106

Click for Details

Mounts DYNOmite PWC absorber to 155mm Kawasaki pump units. (Requires #100-107 - below.)

$995

Click to Engine Adapters page

PWC Adapter - Kawasaki 144mm

#100-107

Click for Details

Mounts DYNOmite PWC absorber to 144mm Kawasaki pump units.

$1,095

Click to Engine Adapters page

$795

#100-108

Click for Details

PWC Adapter - Mounts DYNOmite PWC absorber to 800cc and smaller Sea-Doo pump units.

$895

Click to Engine Adapters page

PWC Adapter - Yamaha 144mm

#100-109

Click for Details

Mounts DYNOmite PWC absorber to 144mm Yamaha pump units.

$1,095

Click to Engine Adapters page

PWC Adapter - Polaris

#100-110

Click for Details

Mounts DYNOmite PWC absorber to Polaris pump units.

$995

Click to Engine Adapters page

PWC Adapter - Yamaha 155mm

#100-111

Click for Details

Mounts DYNOmite PWC absorber to 155mm Yamaha pump units.

$995

Click to Engine Adapters page

PWC Adapter - Sea-Doo 951cc

#100-112

Click for Details

Mounts DYNOmite PWC absorber to 951cc (and larger) Sea-Doo pump units.

$1,095

Click to Engine Stand Options page

Inertial Dyno Flywheel

#100-160 

Click for Details

High-inertia flywheel and PTO mounting hardware for "launch-acceleration" Hp testing of snowmobile engines.

$495

Click to Control Consoles page.

2000 Mini Dyno Wall Console

#100-955

Click for Details

New style console with steel panel, gauge and computer openings, rocker switches, manual push/pull hand throttle assembly. Can also be integrally mounted on DYNOmite Automotive Engine Test Stand.

$1,795

Click to Control Consoles page.

Pro-2000 Console & Computer

#100-960

Click for Details

Allows full remote engine control and operation. Includes: genuine Intel equipped Dell computer, high resolution LCD monitor, manual throttle control, provision to mount DYNOmite load valve control, 4 analog gauges. 

$6,495

Click to Miscellaneous Wiring and Parts page.

Dyno Seal & Bearing Kit 7"

#113-149

Click for Details

Contains field replaceable bearings and seals for the 7" absorber.

$145.00

Click to Miscellaneous Wiring and Parts page.

Dyno Seal & Bearing Kit 7"

#113-150

Click for Details

Contains field replaceable bearings and seals for the older small bearing 9" absorber.

$395

Click to Miscellaneous Wiring and Parts page.

Dyno Seal & Bearing Kit 9"

#113-155

Click for Details

Contains field replaceable bearings and seals for the current large bearing 9" absorber.

$195

Click to Miscellaneous Wiring and Parts page.

Dyno Bearing Kit 5" & 7" Toroid

#113-157

Click for Details

Contains field replaceable bearings and seals for the 5" and 7"Toroid absorber.

$195

Click to Miscellaneous Wiring and Parts page.

Dyno Bearing Kit 9" Toroid

#113-159

Click for Details

Dyno Bearing Kit 9" Toroid - Contains field replaceable bearings and seals for the 9" Toroid absorber manufactured prior to 2007.

$195

Click to Miscellaneous Wiring and Parts page.

Dyno Bearing Kit 9" Toroid

#113-162

Click for Details

Dyno Bearing Kit 9" Toroid - Contains field replaceable bearings and seals for the 9" Toroid absorber manufactured 2007 and later.

$195

Click to Miscellaneous Wiring and Parts page.

Dyno Bearing Kit 13" Toroid

#113-163

Click for Details

Contains field replaceable bearings and seals for the 13" Toroid absorber.

$245

Click to Miscellaneous Wiring and Parts page.

Dyno Bearing Kit 19" Toroid

#113-169

Click for Details

Contains field replaceable bearings and seals for the 19" Toroid absorber.

$595

Click to Plumbing and Cooling page.

Dyno High Flow Ball Valve

#113-175

Click for Details

For greatly improved water flow from your garden hose spigot supplies.

$99.50

Click to Misc. Wiring and Parts page.

DYNOmite Automatic Lube Kit

#113-930

Click for Details

Remote mount grease reservoir, hoses, and fittings to continuously provide pressurized lubrication to DYNOmite's bearings. 

$145

Click to DAQ Wiring Harnesses page.

Lite Data Harness

#425-180

Click for Details

Allows DYNOmite-Lite 3-channel data-acquisition computer to record engine RPM, torque, etc.

$295

Click to DAQ Wiring Harnesses page.

28-Channel Data Harness

#425-280

Click for Details

Expanded harness has leads required to support, separately purchased, data-acquisition options.

$695

Click to Printers and Cables page.

15' Shielded USB Cable

#430-105

Click for Details

15-foot USB cable with RFI shielding (for USB model DYNOmite data-acquisition computers only).

$13.50

Click to Printers and Cables page.

USB to RS-232 Converter Cable

#430-116

Click for Details

Adapts USB equipped PCs and laptops (that do not have an available RS-232 port) to (non-USB ready) DYNOmite data-acquisition computers, etc. Includes 32-bit and 64-bit drivers for Microsoft Windows 7, Vista, and XP. Male DB-9 to USB - 6-feet long.

$59.95

Click to Wireless Interfacing page.

OBD-II Pro Wireless Interface

#430-122 

Click for Details

OBD-II wireless (Bluetooth) interface (or RS-232 DB-9) to DYNO-MAX "Pro" - for most (CAN, PWM. VPW, or ISO) vehicles.

$495

Click to Printers and Cables page.

13' Shielded DB-9 Serial Cable

#435-129

Click for Details

13' DB-9 serial-port cable with EMI shielding and filtering circuitry (for RFI resistance).

$59.95

Click to Relays and Subsystems page

Kill Switch Relay Kit

#430-132 

Click for Details

SPDT relay for ignition over-rev control on normally closed and non "ground-to-kill" applications.

$115

Click to RPM Pick-Ups - Absorber page

Jackshaft RPM/MPH Sensor Kit

#430-135 

Click for Details

RPM/MPH magnetic pickup kit, with DYNOmite EEPROM upgrade, for on-track collection of MPH and shifting data.

$245

Click to AFR and Emissions Analyzer page.

Exhaust Smoke Opacity Meter

#430-170

Click for Details

Provides real-time monitoring of diesel engine's exhaust-stack emissions (includes integral LCD).

$4,495

Click to AFR and Emissions Analyzer page.

Exhaust Measuring System 5-gas

#430-175

Click for Details

Five-gas emissions analyzer (O2, CO, CO2, HCs, and NOX) with real-time readouts (on integral LCD) and optional display and capture of exhaust data (including lambda and AFR) via digital DYNO-MAX RS-232 link.

$6,995

Click to AFR and Emissions Analyzer page.

Wide Band O2 Module w/Pump

#430-182

Click for Details

AFR (air/fuel ratio) module (analog or digital output) with portable, shop-air-supply powered, vacuum pump and tailpipe "sniffer."

$2,495

Click to AFR and Emissions Analyzer page.

AFR (air-fuel ratio) Module

#430-186

Click for Details

Direct-reading exhaust O2 sensor supports both 0 - 5 volt and digital outputs (for integrating directly with DYNO-MAX).

$1,695

Click to RPM Pick-Ups (Engine) page.

Diesel Fuel Rail RPM (1/4")

#430-194

Click for Details

Diesel fuel-rail RPM pickup (1/4") senses RPM from clamp-on fuel-injector-rail transducer.

$265

Click to Electronic Servo Controls page

Auto Load Servo

#430-310

Click for Details

Upgrades manual-load valve DYNOmite to standard-flow (1" barrel with single-outlet port) electronic servo valve, for automatic (computerized) RPM control.

$1,095

Click to Electronic Servo Controls page

Electronic Throttle Controller

#430-312

Click for Details

Allows using your PC to throttle road and track driving simulations, etc. (Requires 56-channel capable "Pro" data-acquisition computer, or expansion upgrade, and DYNO-MAX "Pro" software.)

$1,495

Click to Electronic Servo Controls page

Auto Load Servo (high flow)

#430-314

Click for Details

Upgrades manual-load valve DYNOmite to high-flow (1½" barrel with dual-outlet ports) electronic servo valve, for automatic (computerized) RPM control.

$1,895

Click to Electronic Servo Controls page

Auto Load Servo (ultra flow)

#430-318

Click for Details

Upgrades manual-load valve DYNOmite to ultra-flow (2" barrel with dual-outlet ports) electronic servo valve, for automatic (computerized) RPM control.

$2,395

Click to Control Consoles page.

DYNOmite-Pro DAQ + LCD

#430-340

Click for Details

Advanced, precision, 16-bit 28-channel capable data-acquisition computer, LCD, membrane keypad, housing, and power supply for integration into sophisticated engine and chassis dynamometer systems (or other custom applications). Internally samples RPM (and optional full-bridge torque transducer) at up to 1,000 Hz.

$2,095

Click to Control Consoles page.

DYNOmite-Pro DAQ

#430-341

Click for Details

Advanced, precision, 16-bit 28-channel capable data-acquisition computer and power supply for integration (via DYNO-MAX) into sophisticated engine and chassis dynamometer systems (or other custom applications). Internally samples RPM (and optional full-bridge torque transducer) at up to 1,000 Hz.

$1,795

Click to DAQ Expansion Options page.

DYNOmite-Pro Board Set (only)

#430-345

Click for Details

Advanced, precision, 16-bit 28-channel capable data-acquisition board set (only) for integration into sophisticated engine and chassis dynamometer systems (or other custom applications). Internally samples RPM (and optional full-bridge torque transducer) at up to 1,000 Hz.

$1,695

Click to DAQ Expansion Options page.

DYNOmite-Lite+S Board Set only

#430-346

Click for Details

Low-cost, yet precision, 16-bit 3-channel (+ Stepper-motor output) data-acquisition board set (only) for do-it-yourselfers and students building their own dyno or updating older analog systems. Internally samples RPM (and optional full-bridge torque transducer) at up to 1,000 Hz (field upgradeable to 28-channel “Pro” version). Note: requires DYNO-MAX or DYNO-MAX "Pro" version 9.2 (or later).

$995

Click to DAQ Expansion Options page.

DYNOmite-Lite Board Set (only)

#430-349

Click for Details

Low-cost, yet precision, 16-bit 3-channel data-acquisition board set (only) for do-it-yourselfers and students building their own dyno or updating older analog systems. Internally samples RPM (and optional full-bridge torque transducer) at up to 1,000 Hz (field upgradeable to 28-channel "Pro" version).

$595

Click to Air and Fuel-Flow Meters page.

Standard Fuel Flow BSFC Kit

#430-350

Click for Details

Kit includes: standard fuel-flow transducer, braided-stainless hoses, mounting hardware, and additional EEPROM software functionality. (Requires full-function cable part #425-250 and current EEPROM update.)

$1,195

Click to Air and Fuel-Flow Meters page

Diesel Fuel Flow BSFC Kit

#430-351

Click for Details

Kit includes: diesel fuel-flow transducer, separator, and additional EEPROM software functionality. (Requires full-function cable part #425-250 and current EEPROM update.)

$1,495

Click to Air and Fuel-Flow Meters page.

Dyno BSFC Transducer Low Flow

#430-352

Click for Details

Kit includes flow transducer, and additional EEPROM software functionality. (Requires Full-Function Cable part #425-250 and current EEPROM update).

$2,995

Click to Air and Fuel-Flow Meters page

Dyno BSFC Transducer High Flow

#430-353

Click for Details

Kit includes high-flow transducer, and additional EEPROM software functionality. (Requires Full-Function Cable part #425-250 and current EEPROM update).

$1,495

Click to Thermocouples and Pyrometers page

EGT Kit (1 compression probe)

#430-442

Click for Details

Exhaust-gas temperature kit, with DYNOmite EEPROM upgrade, includes: one compression-fitting thermocouple.

$225

Click to Thermocouples and Pyrometers page

Oil Temperature Dip Stick

#430-447

Click for Details

Long and flexible oil temperature sensor can be slipped into the dip stick tube of most engines. The thermocouples plug hooks into any available DYNOmite EGT channel.

$145

Click to Calibration Equipment page.

Weather Station Module

#430-465

Click for Details

Provides automatic entry of air temperature, barometric pressure, and relative humidity.

$495

Click to Thermocouples and Pyrometers page

Sparkplug/Head Thermocouple

#430-500

Click for Details

Sparkplug and head-temperature thermocouple (requires DYNOmite-EGT upgrade).

$69.50

Click to Air and Fuel Flow Meters page

Dyno Airflow Meter 3"

#430-803

Click for Details

3" 0-50 CFM. For measuring the intake airflow of automotive carburetor equipped engines. These turbine flow meters can often be adapted to other applications. (Requires Data Channel Expansion Unit Part #430-444 and DYNO-MAX software equipped PC).

$745

Click to Wireless Interfacing page.

Wireless DYNOmite Transceiver

#435-173

Click for Details

DYNOmite wireless interface module for communicating with DYNO-MAX from a Bluetooth-enabled laptop or PC (at over 30').

$295

Click to Wireless Interfacing page.

Wireless PC Transceiver (USB)

#435-175

Click for Details

Wireless (USB interface) module, with external antenna, for adding (extended range) Bluetooth capabilities to a laptop or PC. Includes drivers for Microsoft Windows 7, Vista, and XP.

$29.95

Click to Axle-Hub Dyno Specs page.

ACtiveSync Axle-Hub Upgrade

#437-040

Click for Details

ACtiveSync™ Axle-Hub Upgrade (axle-synchronization and motoring) drive option for DYNOmite Axle-Hub Dynamometers. Feature dual 20-Hp motoring drive units with micro-second response heavy-duty AC controllers. Basic ACtiveSync provides precision matching of front-to-rear 2WD axles – on traction-controlled ABS equipped vehicles. For eddy-current absorber equipped axle-hub dynamometer testing, installing a pair of (optional) encoders allows for steeper downhill (motoring) simulations. Adding our (optional) heavy-duty resistive load banks significantly increases these AC-motors’ absorption capacity, allowing them to enhance speed control and synchronization authority – even during standard dynamometer testing. (See below for optional Axle-Hub Encoder Kit and Resistive Load Bank Kit.)

$19,950

Click to Axle-Hub Dyno Options page.

Axle-Flange 4x100,108,114.3 Kit

#437-400

Click for Details

Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 4 x 100mm, 4 x 108mm, & 4 x 114.3mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers.

$795

Click to Axle-Hub Dyno Options page.

Axle-Flange 5x4.50,4.75,5.00 Kit

#437-500

Click for Details

Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 4-1/2", 5 x 4-3/4", & 5 x 5" wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers.

$795

Click to Axle-Hub Dyno Options page.

Axle-Flange 5x100,114.3,120 Kit

#437-505

Click for Details

Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 100mm, 5 x 114.3mm, & 5 x 120mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers.

$795

Click to Axle-Hub Dyno Options page.

Axle-Flange 5x110,112,130 Kit

#437-506

Click for Details

Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 110mm, 5 x 112mm, & 5 x 130mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers.

$795

Click to Axle-Hub Dyno Options page.

Axle-Flange 5x100,108,114.3 Kit

#437-508

Click for Details

Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 100mm, 5 x 108mm, & 5 x 114.3mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers.

$795

Click to Ventilation and Test Cells page.

High Velocity Cooling Blower

#438-140

Click for Details

Portable, fully enclosed, 120-volt blower for directed cooling of bikes and ATVs during dyno testing.

$795

Click to Ventilation and Test Cells page.

42" High-Volume Cooling Fan

#438-142

Click for Details

Large diameter blades move 13,000 CFM of air to help keep radiator and exhaust temperatures in check during stationary vehicle testing. Optimized for efficiency under free-air conditions - 120-volt.

$795

Click to Axle-Hub Dyno Specs page.

Axle-Hub Encoder Kit

#441-022

Click for Details

Encoder kit for ACtiveSync equipped axle-hub dynamometers. Installing encoders allows for "flying starts" of ACtiveSync motors, on eddy-current equipped axle-hub dynamometers, for steeper downhill (motoring) simulations, etc..Compact encoder mounting design and harness is ready for coupling with a pair of 20-Hp ACtiveSync motors and drives.

$1,950

Click to Axle-Hub Dyno Specs page.

Resistive Load Bank Kit

#442-030

Click for Details

Resistive load bank package includes pair of heavy-duty air-cooled cabinets with spiral-wound resistive elements. With the addition of the heavy-duty external load banks, the Active-Synch equipped units have more loading authority and offer an advantage during 2WD testing on the driven axle – because the load banks almost triple the (near instantaneous) loading available from the Active-Synch motor pair. Compact design is sized for coupling with a pair of 20-Hp ACtiveSync motors and drives.

$9,950

Click to Engine Adapters page

DYNOmite Rear Axle Adapter Kit

#575-159

Click for Details

Allows the 9" absorber to be used for in chassis testing at the rear wheel. Fits most karts with the standard US wheel bolt pattern.

$545

Click to Engine Adapters page

Rear Axle Adapter, Metric 3x58mm

#575-160

Click for Details

Allows the 9" absorber (with its four-degree taper arbor) to be used for in chassis testing at the rear wheel. Fits most karts with the popular metric wheel bolt pattern. (Requires simple fabrication of an "anti-rotation" torque-arm stop).

$545

Click to AC Absorbers page.

C-Face Torque Transducer 100 in/lbs

#740-100

Click for Details

Very high-speed AC motor/generator (dynamometer absorbers) using liquid-cooled bearings (see standard RPM versions above for other details).

$4,995*

Click to Torque and Acceleration Transducers page.

Dyno PWC Torque Arm

#769-011

Click for Details

Use the 9" DYNOmite water brake absorber to mount on many personal water crafts without removing the engine from the boat.

$395

Click to DYNO-MAX Dynamometer Software page.

DYNO-MAX "Lite" Software

#801-190

Click for Details

Special low-cost "Lite" version of DYNO-MAX specifically created for students and do-it-yourselfers building their own low-budget dynamometers or adding basic electronic data acquisition to existing analog dynamometers. (Requires PC and DYNOmite data-acquisition board set.)

$745

On Sale*

Call Us*

6/3/2019

Sale*

$495 *

Click to DYNO-MAX Dynamometer Software page.

DYNO-MAX 2010 Software

#801-200

Click for Details

Standard-version data-acquisition software for integrating a 64-bit (or 32-bit) Windows 7 thru 10 (Vista, or XP) equipped PC with the DYNOmite computer. Features: multiple environments, graphing, dampening, etc. (Does not include formula editor, overlaying, report designer, import/export, and many other advanced-configuration features.)

$1,495

On Sale*

Call Us*

6/3/2019

Sale*

$995 *

Click to DYNO-MAX Dynamometer Software page.

DYNO-MAX 2010 "Pro" Software

#801-201

Click for Details

Advanced "Pro"-version data-acquisition software for integrating a 64-bit (or 32-bit) Windows 7 thru 10 (Vista, or XP) equipped PC with the DYNOmite computer. Features: formula editor, report editor, data import/export, advanced configurations, multiple environments, graph overlaying (with averages and variance listings), consecutive run averaging, advanced dampening and spike- filtering controls, data averaging, advanced auto-test editor, and more.

$2,995

On Sale*

Call Us*

6/3/2019

Sale*

$1,995 *

Click to Plumbing and Cooling page.

Cooling Tower Assembly

#910-922

Click for Details

Adjustable (thermostatically controlled) unit gradually adds cold water, to regulate temperatures, without creating thermal stresses in the engine. Individual rotating top and bottom segments allow aligning hoses to the engine (includes multi-diameter hose barbs).

$1,995

Click to Chassis Dyno Options page.

4-post Hydraulic Auto Lift

#950-500

Click for Details

Includes 4-post, adjustable track width, lift, hydraulic power and control module, safety air locks, mounting hardware, and manual.

$4,995

Click to Plumbing and Cooling page.

Portable Pump Kit

#950-750

Click for Details

Portable 1.2 Hp 2-cycle gasoline-powered water pump and hoses for running dyno in remote areas.

$595

Click to Engine Dyno Stands page.

Pro Small-Engine Stand

#970-155

Click for Details

Professional roll-formed steel frame, removable stand (or wall) mount vibration-isolated console, universal (rubber mount) engine plate, throttle, shelves, battery tray, and wheels (less laptop). An optional overhead boom is also available.

$2,995

Click to Kart / ATV Chassis Dynos page.

Kart Roller Assembly

#970-505

Click for Details

Heavy-duty formed-steel frame and low-profile 4-1/2" diameter dual-roller assembly - with machined-in "traction grooves," vibration-pad leveling, front-wheel support, and manual (requires DYNOmite electronics and DYNO-MAX software). Note: An AC, eddy-current, or 9" water-brake absorber is optional.

$7,995

Click to Motorcylce Dyno Options page.

Electric Wheelbase Adjuster

#970-585

Click for Details

Linear actuator electrically positions the adjustable-wheelbase front-tire mount. Note: hand crank is not disabled, so manual positioning is still possible after installation.

$1,295

Click to Motorcylce Dyno Options page.

Trailer - Motorcycle Only Dyno

#970-588

Click for Details

Low profile trailer for Motorcycle Only Dyno - makes your system 100 mobile.

$4,295

Click to Motorcylce Dyno Options page.

Motorcycle/ATV Dyno Trailer

#970-589

Click for Details

Low-profile, DOT-approved, trailering package for our Motorcycle/ATV dynamometer - makes your system 100 mobile.

$4,295

Click to Motorcylce Dyno Options page.

SAE Wheel-Chock Option

#970-590

Click for Details

Provides adjustable tire stop option for testing of most motorcycles on SAE/Legends dyno.

$1,495

*See Terms-of-Sale for "Sale" terms. Pre-packaged systems include a credit (discount) of 33%, off DYNO-MAX list, towards license fees!